Hbase and Zookeeper Znode

The HBase root znode path is configurable using hbase-site.xml, and by default the location is “/hbase”. All the znodes referenced below will be prefixed using the default /hbase location, and the configuration property that lets you rename the particular znode will be listed next to the default znode name and highlighted with bold type.

ZooKeeper provides an interactive shell that allows you to explore the ZooKeeper state — run it by using hbase zkcli and walk through the znode via ls, as in a typical filesystem. You can also get some information about the znode content by using the get command.

$ hbase zkcli
[zk: localhost:2181(CONNECTED) 0] ls /
[hbase, zookeeper]
[zk: localhost:2181(CONNECTED) 1] ls /hbase
[splitlog, online-snapshot, unassigned, root-region-server, rs, backup-masters, draining, table, master, shutdown, hbaseid]
[zk: localhost:2181(CONNECTED) 2] get /hbase/root-region-server
dataLength = 44
numChildren = 0


The znodes that you’ll most often see are the ones that coordinate operations like Region Assignment, Log Splitting, and Master Failover, or keep track of the cluster state such as the ROOT table location, list of online RegionServers, and list of unassigned Regions.

/hbase (zookeeper.znode.parent) The root znode that will contain all the znodes created/used by HBase
/hbase/hbaseid (zookeeper.znode.clusterId) Initialized by the Master with the UUID that identifies the cluster. The ID is also stored on HDFS in hdfs:/<namenode>:<port>/hbase/hbase.id.
/hbase/root-region-server (zookeeper.znode.rootserver) Contains the location of the server hosting the ROOT region. It is queried by the client to identify the RegionServer responsible for ROOT and ask for the META locations. (In 0.96, the ROOT table was removed as part of HBASE-3171, and this znode is replaced by /hbase/meta-region-server [zookeeper.znode.metaserver] that contains the location of the server hosting META.)
/hbase/rs (zookeeper.znode.rs) On startup each RegionServer will create a sub-znode (e.g. /hbase/rs/m1.host) that is supposed to describe the “online” state of the RegionServer. The master monitors this znode to get the “online” RegionServer list and use that during Assignment/Balancing.
/hbase/unassigned (zookeeper.znode.unassigned) Contains a sub-znode for each unassigned region (e.g. /hbase/unassigned/<region name>). This znode is used by the Assignment Manager to discover the regions to assign. (Read this to learn more about the Assignment Manager.)
/hbase/master (zookeeper.znode.master) The “active” master will register its own address in this znode at startup, making this znode the source of truth for identifying which server is the Master.
/hbase/backup-masters (zookeeper.znode.backup.masters) Each inactive Master will register itself as backup Master by creating a sub-znode (hbase/backup-master/m1.host). This znode is mainly used to track which machines are available to replace the Master in case of failure.
/hbase/shutdown (zookeeper.znode.state) Describes the cluster state, “Is the cluster up?” It is created by the Master on startup and deleted by the Master on shutdown. It is watched by the RegionServers.
/hbase/draining (zookeeper.znode.draining.rs) Used to decommission more than one RegionServer at a time by creating sub-znodes with the form serverName,port,startCode (for example, /hbase/draining/m1.host,60020,1338936306752). This lets you decommission multiple RegionServers without having the risk of regions temporarily moved to a RegionServer that will be decommissioned later. Read this to learn more about /hbase/draining.
/hbase/table (zookeeper.znode.masterTableEnableDisable) Used by the master to track the table state during assignments (disabling/enabling states, for example).
/hbase/splitlog (zookeeper.znode.splitlog) Used by the log splitter to track the pending log to replay and its assignment. (Read thisto learn more about log splitting).


The Access Control List (ACL) and the Token Provider coprocessors add two more znodes: one to synchronize access to table ACLs and the other to synchronize the token encryption keys across the cluster nodes.

/hbase/acl (zookeeper.znode.acl.parent) The acl znode is used for synchronizing the changes made to the _acl_ table by the grant/revoke commands. Each table will have a sub-znode (/hbase/acl/tableName) containing the ACLs of the table. (Read this for more information about the access controller and the ZooKeeper interaction.)
/hbase/tokenauth (zookeeper.znode.tokenauth.parent) The token provider is usually used to allow a MapReduce job to access the HBase cluster. When a user asks for a new token the information will be stored in a sub-znode created for the key (/hbase/tokenauth/keys/key-id).


As general rule, all znodes are ephemeral, which means they are describing a “temporary” state — so, even if you remove everything from ZooKeeper, HBase should be able to recreate them. Although the Replication znodes do not describe a temporary state, they are meant to be the source of truth for the replication state, describing the replication state of each machine. (Read this to learn more about replication).

/hbase/replication (zookeeper.znode.replication) Root znode that contains all HBase replication state information
/hbase/replication/peers (zookeeper.znode.replication.peers) Each peer will have a sub-znode (e.g. /hbase/replication/peers/<ClusterID>) containing the ZK ensemble’s addresses that allows the peer to be contacted.
/hbase/replication/peers/<ClusterId>/peer-state(zookeeper.znode.replication.peers.state) Mirror of the /hbase/replication/peers znode, but here each sub-znode (/hbase/replication/peer-state/<ClusterID>) will track the peer enabled/disabled state.
/hbase/replication/state (zookeeper.znode.replication.state) Indicates whether replication is enabled. Replication can be enabled by setting the hbase.replication configuration to true, or can be enabled/disabled by using the start/stop command in the HBase shell. (In 0.96, this znode was removed and the peer-state znode above is used as a reference.)
/hbase/replication/rs (zookeeper.znode.replication.rs) Contains the list of RegionServers in the main cluster (/hbase/replication/rs/<region server>). And for each RegionServer znode there is one sub-znode per peer to which it is replicating. Inside the peer sub-znode the hlogs are waiting to be replicated (/hbase/replication/rs/<region server>/<ClusterId>/<hlogName>).

Online Snapshot Procedures

Online snapshots are coordinated by the Master using ZooKeeper to communicate with the RegionServers using a two-phase-commit-like transaction. (Read this for more details about snapshots.)

/hbase/online-snapshot/acquired The acquired znode describes the first step of a snapshot transaction. The Master will create a sub-znode for the snapshot (/hbase/online-snapshot/acquired/<snapshot name>). Each RegionServer will be notified about the znode creation and prepare the snapshot; when done they will create a sub-znode with the RegionServer name meaning, “I’m done” (/hbase/online-snapshot/acquired/<snapshot name>/m1.host).
/hbase/online-snapshot/reached Once each RegionServer has joined the acquired znode, the Master will create the reached znode for the snapshot (/hbase/online-snapshot/reached/<snapshot name>) telling each RegionServer that it is time to finalize/commit the snapshot. Again, each RegionServer will create a sub-znode to notify the master that the work is complete.
/hbase/online-snapshot/abort If something fails on the Master side or the RegionServer side, the abort znode will be created for the snapshot telling everyone that something went wrong with the snapshot and to abort the job.

Be the first to comment

Leave a Reply

Your email address will not be published.